Livraison gratuite à partir de 75$* Des conditions s'appliquent.
Coupon:
FLASH20
-20% sur produits sélectionnés
Garantie du meilleur prix!
Flex-kids-colonne-1
Flex-kids-colonne-2
nouveaux-enfants-colonne-3
nouveaux-enfants-colonne-4
nouvelles-chaussures-colonne-2
nouvelles-chaussures-colonne-3
nouvelles-chaussures-colonne-4
nouvelle-colonne-vélo-2
nouvelle-colonne-de-neige-1
nouvelle-colonne-de-neige-2
nouvelle-colonne-de-neige-3
nouvelle-sk8-colonne-1
Scandalous love-child of the iconic 420 and PYL boards, the Hybrid immediately got attention with last year's release from anyone that knew anything about its parents. It has the shorter/wider surface-planing of the 420 and employs the Tapered UnderBite outline originally unveiled on the PYL. Floaty and maneuverable with confident edge hold and responsive snap out of turns, we've created a perfect hybrid of these two boards that has constantly grown in popularity. *Please note that the base colour may very depending on the size.
OUTLINE: TAPERED UNDERBITE
Similar looking to “wings” or bumps on a surfboard, it functions a little differently on snow. Each side of the board’s effective edge is segmented into 3 distinct parts that step horizontally inward rather than tapering. Traditional “tapered boards” take the full sidecut and pull the tail inward, which is away from the arc of your turn – this is why they tend to wash out under hard carving. The Tapered UnderBite corrects this by: 1) keeping the sidecut parallel to its corresponding one on the other side of the board. 2) Increasing the sidecut depth as you move towards the tail creating a corrective “hook” to the taper. The board blends into turns effortlessly, has the directional drive and float you’d expect from a tapered board
CORE: POPLAR/PAULOWNIA/BAMBOO
Creating a lighter, more responsive core than the Full Poplar. The Poplar + Bamboo uses the same durable core, lightens it up by replacing 30% of the Poplar with Paulownia and then inserts two bamboo stringers down the full length for added pop and response.
BASE PROFILE
DIRECTIONAL CAMROCK 1-4-1
BASE MATERIALS: SINTERED TRUE
Just like it says. Pellets or coarse powder is pressed until it forms a solid. There are several suppliers for our entire industry and they each have different codes for them, depending on the color and transparency. These codes can make it seem like you’re getting many different kinds and grades of sintered but they’re all pretty much the same as far as you and I will ever tell. True Sintered is harder and more expensive than extruded and it can be faster for those that ride aggressively fast. But to do that, it needs to be waxed and prepared for local conditions.
Board Length (cm) |
153 |
157 |
161 |
Surface Area (dm2) |
42,3 |
43,4 |
44,5 |
Tip Length (cm) |
32,2 |
32,5 |
32,5 |
Tail Length (cm) |
18,7 |
19 |
19 |
Effective Edge Length (cm) |
116,1 |
119,5 |
123,5 |
Contact Length (cm) |
102,1 |
105,5 |
109,5 |
Waist Width (cm) |
26 |
26,4 |
26,4 |
Front Foot Width (cm) |
27,9 |
28,3 |
28,2 |
Rear Foot Width (cm) |
27,4 |
27,7 |
27,6 |
Tip Width (cm) |
31 |
31,6 |
31,6 |
Tail Width (cm) |
30,2 |
30,8 |
30,8 |
Taper (cm) |
0,8 |
0,8 |
0,8 |
Rocker / Camber (mm) |
R0.1-C0.4-R0.1 |
R0.1-C0.4-R0.1 |
R0.1-C0.4-R0.1 |
Sidecut Radius (m) |
7.4-6.4-5.4 |
7.6-6.6-5.6 |
8.1-7.1-6.1 |
Ref. Point (cm) |
58,4 |
58,4 |
59,7 |
Ref. Point (in) |
23 |
23 |
23,5 |
Ref. Stance Setback (cm) |
4 |
4 |
4 |
Min Ref. Stance Width (cm) |
54,4 |
54,4 |
55,7 |
Min Ref. Stance Width (in) |
21,4 |
21,4 |
21,9 |
Max Ref. Stance Width (cm) |
62,4 |
62,4 |
63,7 |
Max Ref. Stance Width (in) |
24,6 |
24,6 |
25,1 |
Rider Weight (lbs) |
140-190 |
150-190 |
160-200 |
Rider Weight (kg) |
64-86 |
68-86 |
72-90 |
GARANTIE DU MEILLEUR PRIX
LIVRAISON GRATUITE À PLUS DE 75$
EN OPÉRATION DEPUIS 1989