RETURNS
MADE EASY
PROUDLY
CANADIAN
BEST PRICE
GUARANTEE
The Dinghy Blunt is a small cruiser board that comes in at 28.5″ long and 8.6″ wide. The extra width up front and mild taper means you get more leverage over the front truck than the rear one, which gives it a somewhat directional steering characteristic.
The Blunt jumps up in size from our other Dinghy models, and so do the trucks. We set the Dinghy Blunt up with Polar Bear 130s to match the added width perfectly. This setup works best with smaller wheels, so we set it up with 60mm 768a Chubby Hawgs to keep you low to the ground and give you great acceleration.
You will have lots of space left over on the trucks for grinds and a nice gradual turn. With virtually the same wheelbase as the Dinghy Classic & about 20 percent more surface area on the top, you will have the same mini board vibes that you get from the Dinghy, but with added stability and control.
Polar Bear 130mm Trucks
Some of us still like to ride a board that is a bit on the narrower-side. And, of course, you need trucks to match it. If you step down in board size then it’s time to step it up to the 130mm Polar Bears. Sold in pairs. Bushings: 85a is softer, 90a is harder. Softer bushings are more lively but less stable – with 88a being what we usually use in our completes.
60mm Chubby Hawgs Wheels
Chubby Hawgs are the wheel of choice on many of our cruiser and ATV completes and are now available separately in all the colours of the rainbow! You can upgrade your cruiser set up today. They use the same high-quality urethane found in the Fatty Hawgs for premium performance, just in a smaller package.
SPACEBALLS Bearings
Spaceballs are our answer to all of your bearing problems. Never again can you lose your washers, or spacers because we’ve built them into the inner race! On the functional side, this means your bearings are always mated correctly which negates any bearing-induced chatter.
